BaseCamp WNC

Welcome back to Base Camp WNC! It's late July, or maybe early August by the time you're reading this, and we’re already preparing for winter by installing a freeze-proof hydrant. If you've ever seen these in stores and wondered how they work, I’m going to walk you through the process. I’ll show you why it’s freeze-proof, how I like to install it, and some extra steps I take to make it even more effective. We’re working on the homestead, running this hydrant out of the well house and into the water system. The key to a freeze-proof hydrant is its installation, which involves burying the bottom part of the hydrant deep enough to avoid freezing temperatures. I like to use four or six-inch corrugated pipe for extra protection, and here we’re using four-inch pipe. Over the top of the hydrant, I place a flower pot filled with gravel for proper drainage at the weep hole—don’t worry, I’ll explain what that means and how it works. To build the stone trap, I’ve taken a four...

Welcome back to Base Camp WNC! Today, we're on my property to work on a hidden spring system that hasn’t been cleaned in over five years. The spring is housed in a concrete block structure with a cement floor, walls, and roof, making it nearly invisible unless you get right up to it. There’s a metal door covering the entrance, and today’s project involves cleaning it out and setting up a small display to show how it was originally built around 1964. Currently, the structure is partially concealed by a tree that fell over it. To give a better idea, the building has a concrete floor, block walls, and a poured cement roof, so it blends seamlessly into the environment. I’m about to remove the door and take you through this adventure as we clean out the accumulated sediment. After taking off the door, it’s a bit difficult to see the back wall clearly, but I’ll describe it as best I can. The inside is about four feet by four feet with cement blocks arranged to allow spring water...

Welcome back to Base Camp WNC! Today, I'll walk you through the process of installing a UV light in an existing water filtration system. I’ll share some tips and tricks I’ve learned, including how to prevent breaking the glass tube, the proper way to install the light, and how to connect everything. Let’s get started! Understanding the Assembly of the UV Light Before we begin the installation, let’s take a closer look at the assembly process for the UV light. These UV light kits are widely available on platforms like Amazon or from specialized suppliers. The model we’re using today is a 55-watt, 110-volt unit, suitable for use in the United States. It features two openings at each end along with a set of water fittings, and it can be mounted in various orientations—horizontal, vertical, or at any angle. The light comes with a long glass tube that resembles a test tube. Begin by sliding a ring over the glass tube, ensuring everything is properly aligned. Gently slide the t...