Tapping a spring in Ireland

Tapping a spring in Ireland
Got a new post on the Carolinahomesteadplanner.com site called Tapping a spring in Ireland. Read the full post by heading on over here: https://www.youtube.com/watch?v=adPCv1kZQko

Comments

Post a Comment

Popular posts from this blog

How to Build a Vintage Wash Stand: A Step-by-Step Guide for DIY Enthusiasts

Image
Welcome to Base Camp WNC, where DIY projects come to life with a sprinkle of history and heaps of practicality. In today’s tutorial, we'll walk you through creating a charming vintage wash stand, complete with wash tubs and a hand wringer—an essential for any home seeking that rustic touch or practical off-grid functionality.  If you are building a homesteading lifestyle , we offer some great tips and resources. Getting Started: The Materials Our project began with the purchase of wash tubs from Home Depot, easily found online for convenience. As for the hand wringer, it was sourced from Amazon. You’ll also need a set of tools, including a saw, drill, and a planer, and some hardware like screws and C clamps. The highlight of our materials list is the repurposed Redwood, salvaged from a deck built in the '60s, giving this project not only a sturdy base but also a story to tell. Step 1: Design and Prep Work Before cutting any wood, decide on the dimensions. Our stand ...
Read more

Building the Ultimate Spring Water Filtration System: DIY Sediment Filter for Clean Water

Image
Welcome back to Base Camp WNC! Today, I'm going to talk about the largest spring box I think I've ever built. This one is either for myself or Mr. Chuck. Both springs are quite old, drawing water from the hillside, but we do get a little dirt and sediment in them. If you’ve watched my channel before, you’ll notice that I rigged up a filter on the outflow pipe to catch some of the sediment, and it works really well. Mr. Chuck has a similar issue with his spring, which we’re currently working on. As I’m going to show you in this video, the setup involves two 15-gallon drums. One drum has the top cut off and fitted to the bottom of the other, making use of both tops. This configuration allows water to enter through a tube that directs it downward, encouraging sediment to settle at the bottom. I also have my usual filters installed in the system. The overflow pipe is located on the side, where the filtered water will exit and flow into the catchment system. Here’s how i...
Read more

How a Pump Saver Can Protect Your Well Pump from Burnout: Installation & Setup Tips

Image
Welcome back to Base Camp WNC! As promised, I’m doing a quick video on this device called the Pump Saver . I picked it up on Amazon for around $389. We're currently in a house with a low-producing well — about half a gallon per minute. The property is rented out, and they have a water system set up that makes it workable. But they had a major issue before: the well would keep running dry. With such low output, the well could only produce about 100 to 150 gallons before running dry. That led to frequent pump problems. This is where the Pump Saver comes in. It monitors the electrical current going to the pump. When the water level drops too low, the current changes — and the device automatically shuts off the pump to prevent damage. Let me take you inside and show you how it works... I've already removed the cover, and you'll see I put a piece of tape over the green indicator light — it was interfering with the camera. To calibrate it, simply turn this screw to “...
Read more